Каталоги

Fitting Position: from drag link ;
Length [mm]: 125 mm ;
Cone Pitch: 1/8 ;
Thread Size: M30x1,5 RH ;
Thread Measurement 2: M24x1,5 ;
Cone Size [mm]: 27.5 mm ;
Cone Size [mm]: 31.5 mm ;
Weight [kg]: 1.86 kg ;
ArticleState: No longer supplied by manufacturer

Fitting Position: Rear Axle ;
Transmission Type: Manual Transmission ;
Parameter: DITAS ;
Length [mm]: 120 mm ;
Weight [kg]: 1.78 kg ;
Cone Size [mm]: 31.5 mm ;
Outer thread [mm]: M24x1,5 mm ;
Outer thread [mm]: M30x1,5 mm ;
Thread Type: with right-hand thread ;
ArticleState: Normal

Fitting Position: Rear Axle ;
Transmission Type: Manual Transmission ;
Parameter: DITAS ;
Length [mm]: 738 mm ;
Weight [kg]: 7.5 kg ;
Pipe Ø [mm]: 42 mm ;
Cone Size [mm]: 31.5 mm ;
Outer thread [mm]: M24x1,5 mm ;
Outer thread [mm]: M30x1,5 mm ;
Outer diameter [mm]: 42 mm ;
Rod/Strut: Push Rod ;
ArticleState: Normal

Chassis number to: 85ZE220000 ;
Transmission Type: Fully Automatic ;
Fitting Position: Rear Axle ;
Chassis number from: 85ZF000001 ;
Length [mm]: 710 mm ;
Outer diameter [mm]: 40 mm ;
Outer thread [mm]: M24 x 1,5 mm ;
Outer thread [mm]: M30 x 1,5 mm ;
Driver Position: for left-hand drive vehicles ;
Cone Size [mm]: 31.5 mm ;
Rod/Strut: Push Rod ;
Pipe Ø [mm]: 40 mm ;
Weight [kg]: 7.4 kg ;
ArticleState: Normal ;
General Information: mit Kronenmuttern und Splinten, vom Lenkgetriebe zur 1. Vorderachse ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.

Chassis number to: 85ZE220000 ;
Transmission Type: Manual Transmission ;
Fitting Position: Rear Axle ;
Length [mm]: 738 mm ;
Outer diameter [mm]: 42 mm ;
Outer thread [mm]: M24 x 1,5 mm ;
Outer thread [mm]: M30 x 1,5 mm ;
Driver Position: for left-hand drive vehicles ;
Cone Size [mm]: 31.5 mm ;
Rod/Strut: Push Rod ;
Pipe Ø [mm]: 42 mm ;
Weight [kg]: 7.5 kg ;
ArticleState: Normal ;
General Information: mit Kronenmuttern und Splinten, vom Lenkgetriebe zur 1. Vorderachse ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.

Axle Load [t]: 7,5 t ;
Manufacturer Restriction: EH20/SH335 ;
Fitting Position: Pitman arm to 1st front axle ;
Fitting Position: Rear Axle ;
Rod/Strut: Push Rod ;
Length [mm]: 710 mm ;
Cone Size [mm]: 31.5 mm ;
Pipe Ø [mm]: 42 mm ;
Adjustable: Adjustable on one side ;
Supplementary Article/Supplementary Info: with accessories ;
Fitting Position: Front Axle ;
ArticleState: Article to be discontinued

Fitting Position: Front ;
Length [mm]: 710 mm ;
Weight [kg]: 7.3 kg ;
Thread Size: M30x1.5 ;
Rod/Strut: Push Rod ;
Outer thread 1 [mm]: M24x1.5 mm ;
ArticleState: Normal

Fitting Position: Front Axle ;
Fitting Position: Pitman Arm to front axle ;
Required quantity: 1 ;
Fitting Position: Rear Axle ;
Rod/Strut: Push Rod ;
Pipe Ø [mm]: 42 mm ;
Length [mm]: 710 mm ;
Driver Position: for left-hand drive vehicles ;
Weight [kg]: 7.23 kg ;
ArticleState: Normal

Axle Load [t]: 7,5 t ;
Manufacturer Restriction: * EH20/SH335 * ;
Fitting Position: Pitman arm to 1st front axle ;
Length [mm]: 740 mm ;
Pipe Ø [mm]: 40 mm ;
Cone Pitch: 1/8 ;
Cone Size [mm]: 31.5 mm ;
Cone Size [mm]: 27.5 mm ;
Thread Size: M30 x 1,5 RHT ;
Rod/Strut: Push Rod ;
ArticleState: Normal

Chassis number to: 85-E-220000 ;
Inner thread [mm]: M 30 x 1.5 mm ;
Height [mm]: 125 mm ;
Weight [kg]: 1.98 kg ;
ArticleState: Normal

Fitting Position: Front Axle ;
Length [mm]: 745 mm ;
Pipe Ø [mm]: 42 mm ;
Cone Size [mm]: 31.5 mm ;
Rod/Strut: Push Rod ;
Adjustable: Adjustable on one side ;
Supplementary Article/Supplementary Info: with accessories ;
ArticleState: Normal

Rod/Strut: Suspension Rod ;
Length [mm]: 730 mm ;
Cone Size [mm]: 31.5 mm ;
Pipe Ø [mm]: 42 mm ;
ArticleState: Normal